Pentax K10D/DA 16-45mm 4 ED AL/ FA 50mm 1.4/Sigma 24-70 F/2.8 EX DG/ Sigma 70-300mm 4-5.6 DG APO/ AF-540FGZ/

Stormtrooper's K-x
Soccer mom's V1

Cytat

===========================================================================
PENTAX K10D Firmware Updating to Version 1.30
===========================================================================

* Firmware is the software that runs inside digital cameras.

Updatable models

K10D digital SLR cameras running Firmware VER:1.00, VER:1.10, VER:1.11 and VER:1.20

How to check version

Turn the power on while pressing the MENU button.
The Firmware version is displayed for about 5 seconds at the center of the LCD monitor.

Perform the above operation without inserting the SD card containing Firmware in the camera.

Be sure to use fully charged battery (DLI-50)
If the camera turns off during updating due to lack of battery power, the
camera will become inoperable. If this happens, a charge will be made for
repairs even if within the warranty period.

Updating Procedure
1. Provide a formated SD memory card for the update software (with at least 16MB of available memory space).
The downloaded file is self-extracting.
The following files are extracted.
readme.txt : this document
fwdc162b.bin : Firmware
Copy the above Firmware file [fwdc162b.bin] to the root directory in the SD card.
If your computer does not have a card slot, you can copy the firmware update file by inserting the SD card into your camera and then connecting the camera directly to your computer.

2. If the camera power is on, turn it off.
3. Insert the update SD card (prepared in step 1) into the camera and close card cover.
4. Turn the camera power on while pressing the MENU button.
5. "NOW LOADING" appears in the LCD monitor, and will change to the "PROGRAM UPDATE". At the bottom of the LCD monitor,
CURRENT VERSION 1.00 / 1.10 / 1.11 / 1.20
UPDATE VERSION 1.30
will be displayed.
6. Press the four-way controller to select "YES" and press the "OK" button.
7. "UPDATING" appears on the LCD monitor and updating starts.
Please do not under any circumstances switch off the power before the update is completed.

It will take approximately 90 seconds to complete update.

8. When update is completed, the "COMPLETE" will be displayed at the left bottom of the LCD monitor, then turn the camera off.
9. Remove the update SD card from the camera.
10. To check the Firmware version in your camera, turn the camera on while pressing the MENU button.

Check that the version displayed in the LCD monitor is "VER:1.30"
The camera automatically starts up after about 5 seconds.
(Caution)

When updating is finished, the update SD card still contains the Firmware file.

If you want to use this card to take pictures, delete the Firmware file first.

PENTAX Corporation

K10D, DA* 16-50/2.8 AL ED [IF] SDM, DA 18-55 (w pudełku), DA 50-200, A 50/f1.7, FA 50/f1.4, FA 28-105, FA 80-320 (na chorobowym), Cosina 100/f3.5, Sigma EF-500 DG Super, Metz 40 MZ-3i
OM-1, OM-2N

Mirek_57 napisał/a:

Może ktos mi podpowie jak zmienić firmware w K10D na 1.30

Pentax K10D/DA 16-45mm 4 ED AL/ FA 50mm 1.4/Sigma 24-70 F/2.8 EX DG/ Sigma 70-300mm 4-5.6 DG APO/ AF-540FGZ/

Bahama Nikuń

Pozdrawiam

6x6 - 24x36 - FF - APS-C - malutki dron

Bahama Nikuń

*ist FA 28-80
K10D DA 18-55, DA 55-300, FA 50 1.4, DA 35/2.8 Limited, Metz 48

K10D i graty: DA*16-50 | FA50 | DA*50-135 | S10-20 3.5

capo_ napisał/a:

Inna sprawa, ale nieco offtopowa to czyszczenie matrycy. Jak to zrobić od strony technicznej?

Sprzęt nie jest ważny. Ważne są zdjęcia.
Ze swoich nigdy nie jestem zadowolony.

K10D i graty: DA*16-50 | FA50 | DA*50-135 | S10-20 3.5

capo_ napisał/a:

Chodziło mi raczej o kwestię podniesienia lustra.

K10D, DA* 16-50/2.8 AL ED [IF] SDM, DA 18-55 (w pudełku), DA 50-200, A 50/f1.7, FA 50/f1.4, FA 28-105, FA 80-320 (na chorobowym), Cosina 100/f3.5, Sigma EF-500 DG Super, Metz 40 MZ-3i
OM-1, OM-2N

K10D i graty: DA*16-50 | FA50 | DA*50-135 | S10-20 3.5

plwk napisał/a:

http://www.pentaximaging.com/customer_care/show_firmware?firmId=8793673

K3 / K500 / 18-55 / *16-50 / *50-135 / 2X AF 540 / D-BG5 / 16x50 PCF

DVX napisał/a:

plwk napisał/a:

http://www.pentaximaging.com/customer_care/show_firmware?firmId=8793673

Również i ja potrzebuję firmware 1.30 aby wypróbowa ten ponoć super cichy SDM ale gdzie go szukać na stronce z podanego linku ??

miałem K-5. mam x-e2

Promocja111 napisał/a:

DVX napisał/a:

plwk napisał/a:

http://www.pentaximaging.com/customer_care/show_firmware?firmId=8793673

Również i ja potrzebuję firmware 1.30 aby wypróbowa ten ponoć super cichy SDM ale gdzie go szukać na stronce z podanego linku ??

Litości!!!
Czy to tak trudno znaleźć???
Firmware do K10D

K3 / K500 / 18-55 / *16-50 / *50-135 / 2X AF 540 / D-BG5 / 16x50 PCF

gezeb napisał/a:

http://www.pentax-hack.info/documents/downloads.html

DVX napisał/a:

plwk napisał/a:

http://www.pentaximaging.com/customer_care/show_firmware?firmId=8793673

Również i ja potrzebuję firmware 1.30 aby wypróbowa ten ponoć super cichy SDM ale gdzie go szukać na stronce z podanego linku ??

K3 / K500 / 18-55 / *16-50 / *50-135 / 2X AF 540 / D-BG5 / 16x50 PCF